41
QuoteRoom / ProSuite + XPO
« : 15 Ноября 2024, 14:57:10 »
Thank you.
Просмотр сообщений
В этом разделе можно просмотреть все сообщения, сделанные этим пользователем.
42
QuoteRoom / ProSuite + XPO
« : 15 Ноября 2024, 08:37:32 »
In GS, the data stopped at the times indicated. After that no data until I noticed, about the time I post here. I just patch the data from your server XPO.
43
QuoteRoom / ProSuite + XPO
« : 15 Ноября 2024, 07:15:00 »
Following stopped updating:
BTCUSD at GMT 22:00
LTC-BN at GMT 22:58
BTC-BN at GMT 22:58
ETH-BN at GMT 22:58
DOGE-BN at GMT 22:58
XCP at GMT 22:58
BTCUSD at GMT 22:00
LTC-BN at GMT 22:58
BTC-BN at GMT 22:58
ETH-BN at GMT 22:58
DOGE-BN at GMT 22:58
XCP at GMT 22:58
44
QuoteRoom / QuoteRoom + ProSuite + XPO
« : 13 Ноября 2024, 14:04:58 »
QR 2107 is working. Presently I have 2 instances of it running. Both on the same computer (Win7). 1 instance running on Win7, 1 instance running on XPMode same Win7 computer. QR 2107 is faster than Forexite QR. Connection is faster. There are lot more price updates. Comparing the 1 min chart will show the obvious. I have today stopped Forexite QR. Loosing feed for so many hours is no go for me.
Presently there are 25 symbols.
I wonder if I can offer any help. I notice Gelium can be very busy and this QR project can take up a lot of time. I did programming all the time a BASIC person - AppleSoft Basic, QuickBasic and Visual Basic 6. Did a bit of SWIFT on iOS but didn't progress far. I can take up new learning if I can help in some way to give back what I am receiving.
Presently there are 25 symbols.
I wonder if I can offer any help. I notice Gelium can be very busy and this QR project can take up a lot of time. I did programming all the time a BASIC person - AppleSoft Basic, QuickBasic and Visual Basic 6. Did a bit of SWIFT on iOS but didn't progress far. I can take up new learning if I can help in some way to give back what I am receiving.
45
QuoteRoom / QuoteRoom + ProSuite + XPO
« : 13 Ноября 2024, 05:18:25 »Перестала работать QuoteRoom Forexite – перестали идти котировки. Интересно, это уже окончательно? Или может быть поменяли адрес сервера?
Yesterday it was down from Moscow time 3:30pm to today 9:30 am. Total about 16 hours. The day before was also down for very long but I did not track. If this continues then it cannot be used.
46
QuoteRoom / QuoteRoom + ProSuite + XPO
« : 12 Ноября 2024, 19:02:00 »
I am still getting use to the auto update feature. I may be wrong I notice QR keep downloading in a loop non stop. So I do manual.
47
QuoteRoom / QuoteRoom + ProSuite + XPO
« : 12 Ноября 2024, 18:54:30 »
Earlier I checked latest was today_4.xpo. Are file content cumulative from 00:00 up to current. Do I just download that one file will do, and ignore the rest?
48
QuoteRoom / QuoteRoom до build 2006 для работы с сервером Forexite
« : 12 Ноября 2024, 15:55:11 »
For 2 days, yesterday and today, Forexite server was down for many hours. It is down now for more than 6 hours today maybe more. Perhaps the writing is now on the wall. The end is finally near?
49
QuoteRoom / QuoteRoom + ProSuite + XPO
« : 12 Ноября 2024, 15:50:15 »
What is in:
today_0.xpo
today_2.xpo
today_3.xpo
and etc... to today_9.xpo
Reason I ask is if I want to patch today's data, which one should I grab?
today_0.xpo
today_2.xpo
today_3.xpo
and etc... to today_9.xpo
Reason I ask is if I want to patch today's data, which one should I grab?
51
QuoteRoom / QuoteRoom + ProSuite + XPO
« : 03 Ноября 2024, 15:58:22 »
After setting up to get data from PC1, this is what I get from PC2.
On start of GS, I get a prompt to install data vendor's software. I ignored.
For now, I clear Event Log and the events captured are in the screen shot. What should be showing if setup is successful?
On start of GS, I get a prompt to install data vendor's software. I ignored.
For now, I clear Event Log and the events captured are in the screen shot. What should be showing if setup is successful?
52
QuoteRoom / QuoteRoom + ProSuite + XPO
« : 02 Ноября 2024, 17:50:36 »See what happens in the protocol of the GS itself on PC 2.
What is this? Where do I check?
53
QuoteRoom / QuoteRoom + ProSuite + XPO
« : 02 Ноября 2024, 16:11:38 »
Re Portal Server.
I read the QuoteRoom Help. Followed the instructions but I can never get this to work.
On PC 1:
Fixed IP address: 192.168.1.7:2189
Portal Server: Work as a data server
Data source for Global Server: Local
On PC 2 same LAN:
Portal Server: Unchecked
Data source for Global Server: Remote 192.168.1.7 (also tried 192.168.1.7:2189)
Re-launch GS and QR on PC1
Re-launch GS on PC2
I have tried this for many years on and off. Wonder is there any steps missing.
I read the QuoteRoom Help. Followed the instructions but I can never get this to work.
On PC 1:
Fixed IP address: 192.168.1.7:2189
Portal Server: Work as a data server
Data source for Global Server: Local
On PC 2 same LAN:
Portal Server: Unchecked
Data source for Global Server: Remote 192.168.1.7 (also tried 192.168.1.7:2189)
Re-launch GS and QR on PC1
Re-launch GS on PC2
I have tried this for many years on and off. Wonder is there any steps missing.
54
QuoteRoom / QuoteRoom для работы с сервером Gelium.net - обо всём на разные темы
« : 02 Ноября 2024, 01:14:57 »
Thank you very much.
55
QuoteRoom / QuoteRoom для работы с сервером Gelium.net - обо всём на разные темы
« : 01 Ноября 2024, 10:25:19 »
Is there any chance to re-include SGD and CNH into the portfolio? They are widely watched over here. I trade them a lot, especially SGD, with intuition from past jobs.
IF not too much. Also ETH as a pair to countercheck vs BTC?
IF not too much. Also ETH as a pair to countercheck vs BTC?
56
QuoteRoom / QuoteRoom для работы с сервером Gelium.net - обо всём на разные темы
« : 01 Ноября 2024, 01:46:27 »
Thank youi.
57
QuoteRoom / QuoteRoom для работы с сервером Gelium.net - обо всём на разные темы
« : 31 Октября 2024, 14:30:12 »
This file is not available:
251024.xpo
251024.xpo
58
TradeStation / TradeStation 9.1 build 12880 (Update 29) + QuoteRoom
« : 30 Октября 2024, 12:39:34 »
I copied part by part of your codes, paste into PowerEditor, and remove everything between all the Begin and End. And VERIFY. These are the syntax errors. Try fix these and see whether it works.
59
TradeStation / TradeStation 9.1 build 12880 (Update 29) + QuoteRoom
« : 30 Октября 2024, 12:33:42 »Цитировать
If DataCompression < 2 and (BarInterval = 480 or BarInterval = 360 or BarInterval = 288 or BarInterval = 240 or BarInterval = 180 or BarInterval = 160 or BarInterval = 144 or BarInterval = 120 or BarInterval = 96 or BarInterval = 90) then begin Sh1 = Sh2; = ShW; Tr1
= TrM; Tr3 = TrD; (BarInterval = 80 or BarInterval = 60 or BarInterval = 48 or BarInterval = 40 or BarInterval = 30 or BarInterval = 24) then begin Sh1 = ShW; Sh2 = ShD; Sh3 = Sh240; Tr1 = TrW; Tr2 = TrD; Tr3 = Tr240; Glub3 = Gl240; End;
Syntax error somewhere in here.
60
TradeStation / TradeStation 9.1 build 12880 (Update 29) + QuoteRoom
« : 30 Октября 2024, 12:31:16 »Цитировать
If DataCompression = 2 or (DataCompression < 2 and (BarInterval = 1439 or BarInterval = 720) then
begin Sh1 = ShQ; Sh2 = ShM; Sh3 = ShW; Tr1 = TrQ; Tr2 = TrM; Tr3 = TrW;
End;
Missing a closing bracket in the IF condition check.
61
TradeStation / TradeStation 9.1 build 12880 (Update 29) + QuoteRoom
« : 30 Октября 2024, 12:09:39 »
If the EasyLanguage codes are copied directly from PowerEditor and pasted here, then offhand on a quick glance there are syntax errors.
Цитировать
(Year(Date) [1]) = 126 and Year(Date) = 150) or
(Year(Date) [1]) = 29 and Year(Date) = 30) or
62
TradeStation / TradeStation 9.1 build 12880 (Update 29) + QuoteRoom
« : 30 Октября 2024, 08:30:48 »
If the indicators are not private and confidential, maybe can post the EasyLanguage codes. I think everyone may be shooting blind.
I do not know whether this affects... Forexite QR just change their clock 1 hour this past Sunday.
I do not know whether this affects... Forexite QR just change their clock 1 hour this past Sunday.
63
QuoteRoom / QuoteRoom build 2006 + ProSuite + XPO
« : 25 Октября 2024, 04:24:36 »Использую QR на которую csk давал ссылку на первой страницеhttps://www.forexite.com/quoteroom/QuoteRoomSetup2021.08.exe
At that time, you were having trouble with realtime feed from Forexite and I gave the link that does not require a login for QR 2021 to work. At that time, I was not aware that Gelium's version can do GS data. Only later I realized from Gelium's hint to turn on service.
Now that if you are intending to download XPO data feature that Gelium has provided, maybe you can try 2107. That's also when the renaming of data (removing A0-FX) was discussed.
64
QuoteRoom / QuoteRoom build 2006 + ProSuite + XPO
« : 23 Октября 2024, 01:02:04 »There are 2 quoteroom.exe processes in Win XP.If this is normal, is it worth trying to do anything about it at all? (I mean adding /nobr to QuoteRoom.exe)
1 app (end task will shut down QR) and 1 background process.
At least this is what I see on my computers.
It is normal. But you were having problems with Firefox so the suggestion to include a start parameter /nobr.
65
QuoteRoom / QuoteRoom build 2006 + ProSuite + XPO
« : 22 Октября 2024, 13:58:32 »
There are 2 quoteroom.exe processes in Win XP.
1 app (end task will shut down QR) and 1 background process.
There are 2 quoteroom.exe processes in Win 7.
1 app (end task will shut down QR) and 1 background process.
There are 3 quoteroom.exe processes in Win 10.
1 app (end task will shut down QR) and 2 background process.
The background process can be end task but it will be run again when QR requires it to do some work.
At least this is what I see on my computers.
1 app (end task will shut down QR) and 1 background process.
There are 2 quoteroom.exe processes in Win 7.
1 app (end task will shut down QR) and 1 background process.
There are 3 quoteroom.exe processes in Win 10.
1 app (end task will shut down QR) and 2 background process.
The background process can be end task but it will be run again when QR requires it to do some work.
At least this is what I see on my computers.
66
QuoteRoom / QuoteRoom build 2006 + ProSuite + XPO
« : 22 Октября 2024, 13:52:07 »Не нашел у себя QuoteRoom.exe /nobr, только QuoteRoom.exe
Add to the end of the line in Target
64-bit Win
"C:\Program Files (x86)\Forexite QuoteRoom\QuoteRoom.exe" /nobr
32-bit Win
"C:\Program Files\Forexite QuoteRoom\QuoteRoom.exe" /nobr
or any custom path you install QR.
67
QuoteRoom / QuoteRoom build 2006 + ProSuite + XPO
« : 28 Сентября 2024, 12:28:24 »I accidentally click the red X button on right top of QR and it close QR immediately without chance to realise my mistake. Suggest put in a prompt to confirm close or abort it to recover from mistake.
Not to worry about this. There is actually a settings - Confirmation - Tick - When closing program.
68
QuoteRoom / QuoteRoom build 2006 + ProSuite + XPO
« : 28 Сентября 2024, 09:24:58 »I don't see the Day Record doubling.
Yes. Yesterday I changed all the session END time to Exchange 23:58 and now there is no more double Daily data after importing the XPO file. The XPO import overwrite the Daily record collected in realtime time.
69
QuoteRoom / QuoteRoom build 2006 + ProSuite + XPO
« : 27 Сентября 2024, 08:09:44 »
I accidentally click the red X button on right top of QR and it close QR immediately without chance to realise my mistake. Suggest put in a prompt to confirm close or abort it to recover from mistake.
70
QuoteRoom / QuoteRoom build 2006 + ProSuite + XPO
« : 27 Сентября 2024, 03:51:43 »I am building up the Server database with Forexite data up to 31Dec2023 and then your XPO files from 1Jan2024. I realise I need to change my session time, or at least the session END time, so that the DAILY data will not have double.
I explain:
1) In realtime, Global Server build the daily data from the realtime feed based on the session time I set. My session GMT is 22:00 to 21:59. Exchange 0:00 to 23:59. I can change them to sync with yours.
2) If the session time you use to build the DAILY files in the XPO are different then when I import I will get double data, one for 22:00 to 21:59 and the other for your session time. See screenshot.
I went through a few 1 min data to compare with your Open and Close on the Daily. I think you use 00:00 - 23:58 (whereas mine has been changed to 00:00 to 23:59 for the extra min after Forexite ceased their XPO.) This may explain the double data and that the realtime compilation display on the later row (23:59).
I am changing my session end time to 23:58.
71
QuoteRoom / QuoteRoom build 2006 + ProSuite + XPO
« : 26 Сентября 2024, 14:55:21 »C - Program Files - Omega Research – Server – этот сервер нужно заархивировать? Если его, то в нем веса(без сжатия) 2,61GB.
It is always a good practice to backup important data. I backup every week on weekends.
Back in the old days when I was using CompuTrac/Apple on the Apple //, everything (programs and data) run from floppy disk. Floppy disk subject to wear very fast. So the community practice then was to have one floppy disk for one day of the week, Mon, Tue, Wed, Thu, Fri. So we have one working four backups. Very tedious.
Now a day, it is a lot simpler. Just copy and save.
72
QuoteRoom / QuoteRoom build 2006 + ProSuite + XPO
« : 26 Сентября 2024, 14:24:55 »Цитировать
there is a separate Day record based on imported data, a separate Day record based on data received in real time
If the session END time are the same in GS and the XPO daily then there will not be seperate/double Day record. Through trial and error with Forexite XPO download, I found out that they use session time Exchange 0:00 to 23:58. So I set my session time to sync with theirs and there is no double record. The XPO import overwrite the data that GS compile in realtime.
So long the session END time in GS and XPO files are the same.
Using 1 min data to plot longer time frame is not practical for me. I chart monthly and weekly data.
73
QuoteRoom / QuoteRoom build 2006 + ProSuite + XPO
« : 26 Сентября 2024, 10:44:01 »
I am building up the Server database with Forexite data up to 31Dec2023 and then your XPO files from 1Jan2024. I realise I need to change my session time, or at least the session END time, so that the DAILY data will not have double.
I explain:
1) In realtime, Global Server build the daily data from the realtime feed based on the session time I set. My session GMT is 22:00 to 21:59. Exchange 0:00 to 23:59. I can change them to sync with yours.
2) If the session time you use to build the DAILY files in the XPO are different then when I import I will get double data, one for 22:00 to 21:59 and the other for your session time. See screenshot.
I explain:
1) In realtime, Global Server build the daily data from the realtime feed based on the session time I set. My session GMT is 22:00 to 21:59. Exchange 0:00 to 23:59. I can change them to sync with yours.
2) If the session time you use to build the DAILY files in the XPO are different then when I import I will get double data, one for 22:00 to 21:59 and the other for your session time. See screenshot.
74
QuoteRoom / QuoteRoom build 2006 + ProSuite + XPO
« : 25 Сентября 2024, 13:56:38 »I am aware the data sets are different. To keep both updated, for now, I will do this:
Both my computers are dual screen. Per computer, I will run QR2104 on VMs and QR1601 on the native Win. Then I can open two TS chart desktops per computer for total four desktops for two computers.
75
QuoteRoom / QuoteRoom build 2006 + ProSuite + XPO
« : 25 Сентября 2024, 09:50:24 »I am trying to understand the question. Am I correct to think that the QR 2006 - 2104 do not have realtime data feed for GlobalServer? Or is such realtime feed implemented? The last time I used QR 2006, it only suport realtime feed for TS2000i.
Add the Portal Server service yourself to any version of QR and work with ProSuite.
I am stunned! All the time, I thought it was removed. I am not aware of this "hidden" gem. Your "Add the Portal Server service yourself..." made me go search for it. I have a XPMode still sitting in the Win7 computer with QR-GS-PS so I fire it up and look around QR. Found it.
76
QuoteRoom / QuoteRoom build 2006 + ProSuite + XPO
« : 25 Сентября 2024, 08:04:40 »Currently I run realtime with Forexite QR because I need the realtime feed. In Portal Client [Omega Server] > Properties > Data tab > Sources = I select Forexite synonym. All my symbols follows Forexite's. If you do not need realtime, you can take my GS database and rename the symbols to suit, example, EURUSD to EUR, USDJPY to JPY, etc. to match Gelium's.
What prevents you from using quotes from Gelium server and switching to EUR instead of EURUSD?
I am trying to understand the question. Am I correct to think that the QR 2006 - 2104 do not have realtime data feed for GlobalServer? Or is such realtime feed implemented? The last time I used QR 2006, it only suport realtime feed for TS2000i.
77
QuoteRoom / QuoteRoom build 2006 + ProSuite + XPO
« : 25 Сентября 2024, 05:27:40 »It seems I didn't hook anything special. Setup wizard - is it the one when installing GS?
In principle, if it doesn't affect the work, pressing an extra button is not a problem.
Menu Tools\Run Setup Wizard.
Yes. I Run Step Wizard choosing the same DBC Online Server I had used initially. The warning "Subserver DLL does not exist" is now gone when launching GlobalServer.
Thank you.
Note: It appeared once during the setup wizard so apparently it was looking for something. But now all is good.
78
QuoteRoom / QuoteRoom build 2006 + ProSuite + XPO
« : 25 Сентября 2024, 02:11:28 »Maybe csk will share with you a ready GlobalServer with TradeRecord. How much history do you need for analysis?Currently loaded since 2000, intraday, daily more.
Daily:
For the major currency pairs, I have some going back to the 1970s or 1980s. Those before 2001 are data I have from the CompuTrac days and I merge them over. The others start from Forexite available history. For DJI and SPX, I have from Jan 1902.
1 min:
I do not keep long. It bloat up the database. I have from only Jan 2022.
Note:
Currently I run realtime with Forexite QR because I need the realtime feed. In Portal Client [Omega Server] > Properties > Data tab > Sources = I select Forexite synonym. All my symbols follows Forexite's. If you do not need realtime, you can take my GS database and rename the symbols to suit, example, EURUSD to EUR, USDJPY to JPY, etc. to match Gelium's.
79
QuoteRoom / QuoteRoom build 2006 + ProSuite + XPO
« : 25 Сентября 2024, 01:50:44 »And another stupid question, recently, when I launch GS, a window started appearing - Subserver DLL does not exist: Should I do something about this?
You can try to run the setup wizard and re-enable DBC SubServer. Or you have hooked up additional gadgets and they need to be removed via the registry editor. This does not affect the operation of GlobalServer.
I get this warning message too... after I rename the symbols in GS (removing the A0-FX). I get this on 2 computers, one Win7 and the other Win10. It does not affect the operation of GS.
80
QuoteRoom / QuoteRoom build 2006 + ProSuite + XPO
« : 17 Сентября 2024, 04:32:23 »https://download.gelium.net/history-xpo/2024/09/
Are the bar times in the XPO files correct?
As per previous, I use a empty Global Server with no symbol, import your 160924.xpo, and then randomly check the 1 min history of a few symbols. The 1 min timing and price data correct as per the realtime feed I am getting from Forexite, see attached screenshot. The "export to XPO settings" you are using is good.